Tools › Mechanical Design › Vehicle Dynamics › Pinewood Derby Car › Example

Gravity derby car: balance point 1 in ahead of the rear axle against the middle

ToolPinewood Derby Car
SourceOriginal case. The track (4 ft start height, 35 ft long, 25° ramp, 4 ft curve radius), the 2.6 g wheels, the wheel and axle diameters, the friction and drag coefficients are illustrative values typed from memory, not official dimensions or measurements of any kit.
LevelUndergraduate

Problem

Two identical 5 oz gravity-powered wooden derby cars, 7 in long with a 4.4 in wheelbase, start with the nose on the same line of a 35 ft track whose start is 4 ft above the level run. One balances 1.0 in ahead of its rear axle, the other midway between the axles (2.2 in). How much sooner does the first one finish, and by what distance?

Inputs to Enter

  • Car weight 5 oz, balance point 1.0 in ahead of the rear axle and 0.5 in high, wheels 2.6 g each, axle lubrication Graphite (friction coefficient 0.12)
  • Track: start height 4 ft, length 35 ft (Simple mode: ramp 25°, curve radius 4 ft)
  • Race against: Same car, weight centered
Open the Pinewood Derby Car tool (loaded with this example)

Answers

  • Drop of the center of mass z = H + d sin θ − h (1 − cos θ) = 48 + 5.0 × 0.4226 − 0.5 × (1 − 0.9063) = 50.07 in; the centered car drops 49.56 in
  • Speed from the drop alone √(2 g z) = 16.39 ft/s; wheel-spin factor 1 + 4 × 2.6 × 0.8² / 141.7 = 1.047; friction as a slope 0.12 × 0.0737 × 0.927 + 0.002 = 0.0102
  • Finish 2.9093 s at 14.61 ft/s (10.0 mph) against 2.9185 s: 0.009 s and 1.6 in at the line, 0.23 of a car length
  • Energy of the drop 250.3 in-oz: 79.6 % speed, 3.74 % wheel spin, 7.34 % axle friction, 1.79 % rolling resistance, 7.57 % air drag
  • Each inch of balance-point shift is worth about 7.7 ms; one change at a time: lighter wheels (1.5 g) 24.9 ms, lower friction (0.05) 31.8 ms, lower body 17.6 ms, a raised front wheel 14.7 ms

Notes

Open this case in the tool: /analysis-tools/mechanical/vehicle-dynamics/pinewood-derby/?try=weight-back. The tool's default inputs are this case. The times agree with two independent scipy computations (test_pinewood_derby.php); they are comparisons between cars, not predictions of a timer. Rules differ from race to race: follow your own.

More Examples for This Tool