Tools › Mechanical Design › Vehicle Dynamics › Pinewood Derby Car › Example

Gravity derby car: every change at once against a plain kit build

ToolPinewood Derby Car
SourceOriginal case. Every wheel, friction and drag value is illustrative, typed from memory; no dimension is an official one.
LevelUndergraduate

Problem

A tuned derby car (5 oz, balance point 0.75 in ahead of the rear axle, 1.5 g wheels, axle friction 0.08, body 0.75 in high) races a plain build (4.5 oz, balance point in the middle at 2.2 in, 2.6 g wheels, dry axles at 0.25, body 1.25 in high) on a 35 ft track with a 4 ft start height. By how many car lengths does it win, and where did each car's energy go?

Inputs to Enter

  • Advanced mode. Your car: 5 oz, balance point 0.75 in, 0.4 in high, wheels 1.5 g, Polished axles and graphite (0.08), body height 0.75 in, four wheels on the track
  • Rival: another car, 4.5 oz, balance point 2.2 in, 0.7 in high, wheels 2.6 g, axle friction 0.25, body height 1.25 in
  • Track: start height 4 ft, length 35 ft, ramp 25°, curve radius 4 ft
Open the Pinewood Derby Car tool

Answers

  • Drop of the center of mass 50.18 in against 49.54 in
  • Energy turned into speed: 86.0 % against 71.3 %; axle friction 5.06 % against 15.28 %; air drag 4.78 % against 7.93 %; wheel spin 2.33 % against 3.72 %
  • Finish 2.8462 s at 15.22 ft/s (10.4 mph) against 2.9933 s at 13.76 ft/s: 0.147 s, 24.4 in at the line, 3.5 car lengths
  • Front wheels of the tuned car carry 17 % of its weight, above the 15 % set as the least

Notes

Open this case in the tool: /analysis-tools/mechanical/vehicle-dynamics/pinewood-derby/?try=tuned-vs-kit. The model assumes both cars run straight; a wheel rubbing the guide rail can cost more than all of these gains. Check every change against the rules of your own race.

More Examples for This Tool