Tools › Mechanical Design › Vehicle Dynamics › Pinewood Derby Car › Example
Gravity derby car: axle friction coefficient 0.12 against 0.25
| Tool | Pinewood Derby Car |
| Source | Original case. The friction coefficients 0.12 (graphite) and 0.25 (dry) are illustrative values typed from memory, not measurements of any product. |
| Level | Undergraduate |
Problem
Two identical 5 oz derby cars differ only at the axles: one runs a friction coefficient of 0.12 between wheel bore and axle, the other 0.25. The axle (0.087 in) is 13.6 times smaller than the wheel (1.18 in), which cuts the friction felt at the track by the same ratio. How far apart do they finish on a 35 ft track?
Inputs to Enter
- Your car: 5 oz, balance point 1.0 in, 0.5 in high, wheels 2.6 g, Graphite (0.12)
- Rival: another car, the same except axle friction 0.25
- Track: start height 4 ft, length 35 ft
Answers
- Friction as a slope: μ (d_axle / d_wheel) f_ax + C_rr = 0.12 × 0.0737 × 0.927 + 0.002 = 0.0102; with 0.25 it is 0.0191
- Share of the energy lost at the axles: 7.34 % against 15.27 %
- Finish 2.9093 s at 14.61 ft/s against 2.9721 s at 13.94 ft/s: 0.063 s, 10.5 in at the line, 1.5 car lengths
Notes
Open this case in the tool: /analysis-tools/mechanical/vehicle-dynamics/pinewood-derby/?try=graphite. For this car, axle friction is the change worth most of those the tool lists. Check which lubricants your rules allow.
More Examples for This Tool
- Gravity derby car: balance point 1 in ahead of the rear axle against the middle
- Gravity derby car: 1.0 g wheels against 2.6 g wheels at the same total weight
- Gravity derby car: 5.0 oz against 4.0 oz, and why the heavier car wins
- Gravity derby car: a body 0.6 in high against one 1.75 in high
- Gravity derby car: every change at once against a plain kit build