Tools › Mechanical Design › Vehicle Dynamics › Pinewood Derby Car › Example
Gravity derby car: 1.0 g wheels against 2.6 g wheels at the same total weight
| Tool | Pinewood Derby Car |
| Source | Original case. Wheel weights, the wheel mass spread k/r = 0.8 and all friction and drag values are illustrative, typed from memory. |
| Level | Undergraduate |
Problem
Two 5 oz derby cars are identical except for their wheels: 1.0 g each on one and 2.6 g each on the other, with the difference moved into the body so that both weigh the same. A rolling wheel has to be spun up as well as moved forward. What is the lighter set worth on a 35 ft track with a 4 ft start height?
Inputs to Enter
- Your car: 5 oz, balance point 1.0 in ahead of the rear axle, 0.5 in high, wheels 1.0 g each, Graphite (0.12)
- Rival: another car, 5 oz, balance point 1.0 in, 0.5 in high, wheels 2.6 g, axle friction 0.12
- Track: start height 4 ft, length 35 ft
Answers
- Wheel-spin factor 1 + n w k² / W: 1 + 4 × 1.0 × 0.64 / 141.7 = 1.018 against 1.047
- Share of the energy stored in wheel spin: 1.47 % against 3.74 %
- Finish 2.8730 s at 14.77 ft/s against 2.9093 s at 14.61 ft/s: 0.036 s, 6.37 in at the line, 0.91 of a car length
Notes
Open this case in the tool: /analysis-tools/mechanical/vehicle-dynamics/pinewood-derby/?try=light-wheels. Both cars drop the same 50.07 in; the whole gain is energy that no longer goes into spin. Check what wheels your rules allow.
More Examples for This Tool
- Gravity derby car: balance point 1 in ahead of the rear axle against the middle
- Gravity derby car: axle friction coefficient 0.12 against 0.25
- Gravity derby car: 5.0 oz against 4.0 oz, and why the heavier car wins
- Gravity derby car: a body 0.6 in high against one 1.75 in high
- Gravity derby car: every change at once against a plain kit build