Tools › Structures › Stress and Strain › Failure Theories › Example

Six stress components: principal stresses from the characteristic cubic and the yield factors of safety

ToolFailure Theories
SourceOriginal case. Theories as stated in National Aeronautics and Space Administration (1975). Astronautic Structures Manual, Volume I. NASA Technical Memorandum X-73305, George C. Marshall Space Flight Center, Huntsville, AL. Section A1.4, pp. 34–35.
LevelUndergraduate

Problem

The stress at a point inside a part is σ_x = 100, σ_y = 40, σ_z = −30, τ_xy = 50, τ_yz = 20, τ_zx = −10 MPa. The yield strength is 350 MPa (illustrative). Find the principal stresses and the factor of safety against yielding by the maximum-shear-stress and distortion-energy theories.

Inputs to Enter

  • σ_x = 100, σ_y = 40, σ_z = −30, τ_xy = 50, τ_yz = 20, τ_zx = −10 MPa
  • Ductile material, yield strength S_y = 350 MPa (illustrative)
Open the Failure Theories tool

Answers

  • Invariants I_1 = 110 MPa, I_2 = −3,200 MPa², I_3 = −109,000 MPa³; cubic σ³ − 110 σ² − 3,200 σ + 109,000 = 0
  • Principal stresses σ_1 = 128.3 MPa, σ_2 = 21.39 MPa, σ_3 = −39.71 MPa (numpy eigenvalues agree)
  • Maximum shear stress (Tresca): σ_1 − σ_3 = 168.0 MPa, n = 350 / 168.0 = 2.08
  • Distortion energy (von Mises): σ′ = 147.3 MPa, n = 350 / 147.3 = 2.38

Notes

Open this case in the tool: /analysis-tools/structures/stress-strain/failure-theories/?try=three-d. The envelope chart of a three-dimensional state is drawn in the plane of the largest and smallest principal stresses. Numbers checked in test_failure_theories.php against an independent numpy calculation.

More Examples for This Tool