Tools › Structures › Joints › MIL-HDBK-5J Fastener Allowables › Example

Knife-edge countersink: a 5/32 in flush pin in 0.040 in sheet

ToolMIL-HDBK-5J Fastener Allowables
SourceU.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, Department of Defense, Washington, DC. Table 8.1.5.2(h), p. 8-139, footnote c.
LevelProfessional

Problem

The same Hi-Lok pin in the 5/32 size (shank 0.164 in, head height 0.040 in) is put in 0.040 in 7075-T6 sheet. What does the handbook give, and what does its mark on the value mean?

Inputs to Enter

  • Table 8.1.5.2(h), 7075-T6 and T651
  • Fastener diameter 5/32 (0.164 in), sheet thickness 0.040 in
Open the MIL-HDBK-5J Fastener Allowables tool

Answers

  • Ultimate 734 lb, marked with footnote c and set above the line drawn in the table; yield 690 lb
  • Head height / sheet thickness = 0.040 / 0.040 = 1.00: the countersink reaches through the sheet (knife edge)
  • Footnote c: values above the line are for the knife-edge condition, whose use is undesirable and needs the procuring agency's approval for military aircraft
  • Fastener shear strength 2,281 lb; the sheet develops 734 / 2,281 = 0.322 of it

Notes

Open this case in the tool: /analysis-tools/structures/joints/fastener-joint-allowables/?try=knife-edge. The knife-edge line is a set of short rules drawn inside the table; the tool finds it from the page drawing and keeps the mark on the value.

More Examples for This Tool