Tools › Structures › Joints › MIL-HDBK-5J Fastener Allowables › Example

Flush Hi-Lok pin in 7075-T6 sheet: joint strength read from MIL-HDBK-5J Table 8.1.5.2(h)

ToolMIL-HDBK-5J Fastener Allowables
SourceU.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, Department of Defense, Washington, DC. Table 8.1.5.2(h), p. 8-139.
LevelProfessional

Problem

A 3/16 in flush shear head alloy steel Hi-Lok (HL 719 pin, HL 79 collar, F_su = 108 ksi) joins 0.063 in 7075-T6 sheet, machine countersunk. Find the ultimate and yield joint strength the handbook tabulates, and how much of the pin's shear strength the sheet develops.

Inputs to Enter

  • Table 8.1.5.2(h), sheet and plate material 7075-T6 and T651
  • Fastener diameter 3/16 (nominal shank diameter 0.190 in), sheet thickness 0.063 in
Open the MIL-HDBK-5J Fastener Allowables tool (loaded with this example)

Answers

  • Ultimate joint strength 1,565 lb; yield joint strength 1,261 lb (yield / ultimate = 0.806)
  • Fastener shear strength: 108 ksi · π · 0.190² / 4 = 3,062 lb, as the table prints
  • The sheet develops 1,565 / 3,062 = 0.511 of the pin's shear strength: the joint is sheet-critical
  • Head height 0.046 in is 73 % of the sheet thickness; t / D = 0.332

Notes

The tool's opening case. Open it in the tool: /analysis-tools/structures/joints/fastener-joint-allowables/?try=hi-lok-7075. The table values were parsed from the handbook PDF and checked against the rendered page (test_fastener_joint_allowables.php). Applicable only with an edge distance of two diameters (Section 8.1.1.3).

More Examples for This Tool