Tools › Structures › Joints › MIL-HDBK-5J Fastener Allowables › Example

Quarter-inch bolt at 95 ksi: single shear strength from Table 8.1.5(a)

ToolMIL-HDBK-5J Fastener Allowables
SourceU.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, Department of Defense, Washington, DC. Table 8.1.5(a), p. 8-127; Section 8.1.5, p. 8-125.
LevelProfessional

Problem

Find the ultimate single shear strength of a 1/4 in threaded fastener with a shear strength level of 95 ksi, and show where the tabulated number comes from.

Inputs to Enter

  • Table 8.1.5(a), shear stress of fastener 95 ksi
  • Fastener diameter 0.250 in (size 1/4)
Open the MIL-HDBK-5J Fastener Allowables tool

Answers

  • Tabulated ultimate single shear strength 4,660 lb
  • Basic shank area printed in the table: 0.049087 in²
  • 95 ksi · 0.049087 in² = 4,663 lb, which the handbook rounds to 4,660 lb (0.07 %)
  • In SI: 20,729 N

Notes

Open this case in the tool: /analysis-tools/structures/joints/fastener-joint-allowables/?try=bolt-shear. The strength of the fastener alone says nothing about the sheet; the joint tables or a bearing check cover that. Every cell of Tables 8.1.5(a), (b1) and (b2) was checked against stress times area in test_fastener_joint_allowables.php.

More Examples for This Tool