Tools › Structures › Joints › MIL-HDBK-5J Fastener Allowables › Example
MS20426AD flush rivet in dimpled 2024-T3: where the rivet, not the sheet, governs
| Tool | MIL-HDBK-5J Fastener Allowables |
| Source | U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, Department of Defense, Washington, DC. Table 8.1.2.2(c), p. 8-19; Table 8.1.2(b), p. 8-13; Table 8.1.2(a), p. 8-12. |
| Level | Professional |
Problem
A 1/8 in MS20426AD (2117-T3, F_su = 30 ksi) 100° flush rivet is driven in dimpled 0.032 in 2024-T3 sheet. Find the tabulated joint strengths and say what governs.
Inputs to Enter
- Table 8.1.2.2(c), sheet group 2024-T3, 2024-T42, 2024-T62, 2024-T81
- Rivet diameter 1/8 (nominal hole diameter 0.1285 in), sheet thickness 0.032 in
Answers
- Ultimate 388 lb, yield 367 lb
- Rivet shear strength 388 lb: the joint is shear-critical, the sheet develops the whole rivet
- Check from Table 8.1.2(b): 30 ksi · π · 0.1285² / 4 = 389.1 lb; that table prints 389 lb and the joint table 388 lb
- At 0.025 in the same column gives 360 lb ultimate and 315 lb yield: sheet-critical
Notes
Open this case in the tool: /analysis-tools/structures/joints/fastener-joint-allowables/?try=flush-rivet-2024. The 388 against 389 lb difference between the two tables is the handbook's. Footnote a of the table forbids extrapolation to gages not shown and requires the machine-countersunk lower sheet to be one gage thicker.