Tools › Structures › Fatigue › Stress-Life Fatigue and Goodman Diagram › Example

High mean stress with a small ripple: inside the Goodman line but yielding on the first cycle

ToolStress-Life Fatigue and Goodman Diagram
SourceOriginal case. Criteria as written in Kalluri, S., and McGaw, M. A. (1991). Effect of Tensile Mean Stress on Fatigue Behavior of Single-Crystal and Directionally Solidified Superalloys. NASA Technical Memorandum 103644, Lewis Research Center, Cleveland, OH. Equations (1) to (3).
LevelUndergraduate

Problem

A preloaded steel part (ultimate 100 ksi, yield 80 ksi, endurance limit 50 ksi estimated as one-half of ultimate) carries a mean stress of 74 ksi with an alternating stress of 8 ksi. Does it have infinite fatigue life, and does it yield?

Inputs to Enter

  • Simple mode, USCS: cycle entered as alternating 8 ksi and mean 74 ksi
  • Ultimate strength 100 ksi, yield strength 80 ksi; endurance limit estimated as 0.5 of ultimate
Open the Stress-Life Fatigue and Goodman Diagram tool

Answers

  • Maximum stress 82 ksi, minimum 66 ksi, R = 0.805, A = 0.108
  • Modified Goodman n = 1 / (8/50 + 74/100) = 1.11; Gerber n = 1.21: infinite fatigue life by both
  • ASME-elliptic n = 1.07; Soderberg n = 1 / (8/50 + 74/80) = 0.922
  • First-cycle yield n_y = 80 / (8 + 74) = 0.976: the maximum stress of 82 ksi exceeds the yield strength, so yielding governs

Notes

Open this case in the tool: /analysis-tools/structures/fatigue/goodman-stress-life/?try=high-mean. A line drawn to the ultimate strength (Goodman, Gerber) does not check yielding; the Langer line does. Soderberg, drawn to the yield strength, is below 1 here for that reason.

More Examples for This Tool