Tools › Electrical and Controls › Control Systems › Transfer Function Analyzer › Example

An unstable plant made stable by feedback: K / ((s − 1)(s + 3)) and a gain margin below 1

ToolTransfer Function Analyzer
SourceOriginal case; closed forms from the characteristic polynomial s² + 2s + (K − 3).
LevelUndergraduate

Problem

A plant 1 / ((s − 1)(s + 3)) has a pole at s = +1 and is unstable on its own. It is placed in a unity-feedback loop with gain K = 10. Find the range of K that stabilizes it, the closed-loop poles, the step response and the margins.

Inputs to Enter

  • Numerator 1; denominator 1 2 -3 (s² + 2s − 3); gain K = 10
  • G(s) is the open loop, closed with unity feedback; input signal: unit step
Open the Transfer Function Analyzer tool

Answers

  • Characteristic polynomial s² + 2s + (K − 3): stable for K > 3; at K = 3 a pole sits at s = 0
  • At K = 10: poles −1 ± j 2.449 (√6), ω_n = 2.646 rad/s, ζ = 0.378
  • Final value 10 / 7 = 1.429 (K_p = −3.333, steady-state error −0.4286: the output ends above the input)
  • Overshoot 27.73 % (peak 1.825 at 1.283 s); settling time 3.988 s
  • Gain margin 3 / 10 = 0.3 (−10.46 dB) at zero frequency: the gain may fall to 30 % before the loop goes unstable; phase margin 28.71° at 2.402 rad/s
  • Root locus: the two branches meet at s = −1 when K = 4 and then run vertically

Notes

Open this case in the tool: /analysis-tools/electrical/controls/transfer-function-analyzer/?try=unstable-plant. For an open loop with a pole in the right half-plane the usual reading of the margins does not apply; the tool says so and judges stability by the closed-loop poles.

More Examples for This Tool