Tools › Aerodynamics › Trajectories and Spaceflight › Atmospheric Entry Heating and Deceleration › Example

The Stardust sample return capsule: the fastest entry into Earth's atmosphere, 12.9 km/s

ToolAtmospheric Entry Heating and Deceleration
SourceDesai, P. N., and Qualls, G. D. (2008). "Stardust Entry Reconstruction." AIAA Paper 2008-1198, pp. 2 and 6 (12.9 km/s and −8.2° at a radius of 6,503.14 km; 32.89 g reconstructed); Desai, P. N., Lyons, D. T., Tooley, J., and Kangas, J. (2006). "Entry, Descent, and Landing Operations Analysis for the Stardust Re-Entry Capsule." AIAA Paper 2006-6410, pp. 2 and 4 (45.8 kg, about 0.8 m in diameter, limits of 40 g, 1,200 W/cm² and 32 kJ/cm²). The drag coefficient (1.5) and nose radius (0.23 m) are illustrative.
LevelUndergraduate

Problem

The Stardust capsule (45.8 kg, about 0.8 m in diameter, a blunted 60° cone) returned comet dust to Earth in January 2006, entering at an inertial speed of 12.9 km/s and a flight-path angle of −8.2°. Treat it as a ballistic body with a drag coefficient of 1.5 and a nose radius of 0.23 m and find its peak deceleration, peak stagnation heat flux and heat load.

Inputs to Enter

  • Planet Earth; entry speed 12,900 m/s; entry angle 8.2° below the horizontal (entry altitude 121.92 km, the tool's value; the mission's interface was at 125 km)
  • Mass 45.8 kg, base diameter 0.8 m, drag coefficient 1.5, nose radius 0.23 m
Open the Atmospheric Entry Heating and Deceleration tool

Answers

  • Ballistic coefficient 45.8 / (1.5 × 0.5027) = 60.74 kg/m²
  • Closed form: 59.20 g at 49.74 km; numerical integration 39.49 g at 53.18 km, 49.7 s after entry (reconstructed flight value 32.89 g; limit 40 g)
  • Peak heat flux at the nose 788.9 W/cm² at 61.08 km, about 5,800 times full sunlight (convective only; mission limit 1,200 W/cm² for the total)
  • Heat load 22,420 J/cm² (limit 32 kJ/cm²); above 5 g for 58.6 s
  • A surface shedding the peak flux by radiation alone would sit near 3,530 K

Notes

Open this case in the tool: /analysis-tools/aerodynamics/trajectories/atmospheric-entry/?try=stardust. The tool is 20 % above the reconstructed deceleration: it uses the inertial speed as the speed through the air, an exponential atmosphere and an assumed drag coefficient. Starting at the mission's 125 km interface (Advanced mode) gives 38.3 g. Radiative heating, important at this speed, is not included.

More Examples for This Tool