Tools › Finance and Business › Pricing › Contract Profit Objective › Method
Contract Profit Objective: Method
Open the Contract Profit Objective tool
Contract Profit Objective: the DoD Weighted Guidelines Method, Line by Line
When a U.S. Department of Defense contract is negotiated on certified cost or pricing data, the contracting officer develops a prenegotiation profit or fee objective with a structured approach (DFARS 215.404-4(b)), normally the weighted guidelines method of DFARS 215.404-71, and records it on DD Form 1547, Record of Weighted Guidelines Application (edition of April 2020). The page performs that arithmetic in the order of the form's lines. It is a structured illustration of the regulation, not contracting advice: the assigned values are judgments made under the evaluation criteria of the rule, and the page only multiplies them by their bases and compares them with the designated ranges.
Text used. DD Form 1547, April 2020, for the item numbers, names and layout; DFARS 215.404-70 to 215.404-71-5 and FAR 15.404-4 as read in the Electronic Code of Federal Regulations on 17 November 2026 (title 48 current as of 13 November 2026), and PGI 253.215-70 as read on acquisition.gov the same day. The rule changes; every normal value, range and limit below is an input in Advanced mode, so the page can follow it.
The four factors
215.404-71-1(a) names four profit factors: performance risk, contract type risk, facilities capital employed and cost efficiency. Under 215.404-71-1(b) the contracting officer assigns a value to each factor, and "the value multiplied by the base results in the profit objective for that factor". Except for the cost efficiency factor, each has a normal value, representative of average conditions when compared to all goods and services acquired by DoD, and a designated range for above normal or below normal conditions.
Cost objective: Blocks 13 to 20
Blocks 13 to 20 hold the prenegotiation cost objective by element; independent research and development and bid and proposal costs go into general and administrative expense, Block 19 (PGI 253.215-70(c)(13)). Block 20, the total, is "total contract costs, excluding facilities capital cost of money" (215.404-71-2(b)(4)) and is the base of the performance risk, contract type risk and cost efficiency factors.
B18 = material + subcontracts + direct labor + indirect expenses + other direct charges; B20 = B18 + G&A
FAR 15.404-4(c)(3) adds two exclusions before profit factors are applied: any facilities capital cost of money, and "the purchase cost of contractor-acquired property that is categorized as equipment, as defined in FAR 45.101, and where such equipment is to be charged directly to the contract". The first is entered apart from the cost elements (Block 32). For the second, Advanced mode has an entry that is subtracted from Block 20 to give the profit base and stays in the total cost.
Performance risk: Blocks 21 to 23
The factor has a technical part and a management / cost control part. Each gets a weight (the two total 100 percent) and a value, and the composite is the weighted sum. The rule prints this example (215.404-71-2(b)(3)), with which the page opens: technical 60 percent at 5.0, management / cost control 40 percent at 4.0, composite 3.0 + 1.6 = 4.6 percent.
Vcomp = wtech vtech + (1 − wtech) vmgmt; P23 = Vcomp × B20
Values (215.404-71-2(c)): standard, normal 5 percent, range 3 to 7 percent; technology incentive, normal 9 percent, range 7 to 11 percent. The technology incentive range is for the technical value only, for acquisitions that include development, production or application of innovative new technologies. Management / cost control may gain one percentage point, up to 7 percent, for a timely qualifying proposal on an undefinitized contract action (215.404-71-2(e)(2)(iii)); the page leaves that addition to the entry.
Contract type risk: Block 24
P24 = assigned value × B20, with the value from the table of 215.404-71-3(c):
| Contract type | Note | Normal value (%) | Designated range (%) |
|---|---|---|---|
| Firm-fixed-price, no financing | (1) | 5 | 4 to 6 |
| Firm-fixed-price, with performance-based payments | (6) | 4 | 2.5 to 5.5 |
| Firm-fixed-price, with progress payments | (2) | 3 | 2 to 4 |
| Fixed-price incentive, no financing | (1) | 3 | 2 to 4 |
| Fixed-price incentive, with performance-based payments | (6) | 2 | 0.5 to 3.5 |
| Fixed-price with redetermination provision | (3) | ||
| Fixed-price incentive, with progress payments | (2) | 1 | 0 to 2 |
| Cost-plus-incentive-fee | (4) | 1 | 0 to 2 |
| Cost-plus-fixed-fee | (4) | 0.5 | 0 to 1 |
| Time-and-materials (including overhaul contracts priced on a time-and-materials basis) | (5) | 0.5 | 0 to 1 |
| Labor-hour | (5) | 0.5 | 0 to 1 |
| Firm-fixed-price, level-of-effort | (5) | 0.5 | 0 to 1 |
Notes of the table: (1) no financing, do not compute a working capital adjustment; (2) with progress payments, compute it; (3) a fixed-price contract with redetermination provisions is treated as a fixed-price incentive contract with below normal conditions; (4) cost-plus contracts shall not receive the adjustment; (5) these types are considered cost-plus-fixed-fee contracts for assigning profit values and receive no adjustment; (6) with performance-based payments, do not compute it. The table prints no numbers in the redetermination row: the page uses the range of fixed-price incentive, no financing, and opens at its low end, which is this page's reading of note (3) and not a value of the rule.
Costs incurred before definitization. 215.404-71-3(d)(2)(i) has the contracting officer assess the costs incurred before definitization of an undefinitized contract action and allows separate values for incurred costs (Block 24a) and for the Government estimated cost to complete (Block 24b); the value for incurred costs is generally in the low end of the range and may be as low as zero. In Advanced mode: P24a = value × incurred costs, P24b = value × (B20 − incurred costs), and Block 24c is their sum.
Working capital adjustment: Block 25
Only for fixed-price contracts that provide progress payments (215.404-71-3(a) and (b)(4)):
P25 = costs financed × contract length factor × interest rate, not above 4 percent of Block 20
Costs financed are the total costs, reduced where the contractor has little cash investment or special financing applies, times the portion the contractor finances, generally 100 percent minus the customary progress payment rate (215.404-71-3(e); the rule's example: progress payments at 80 percent leave 20 percent). The contract length factor comes from the period needed for the substantive portion of the work (215.404-71-3(f)(2)):
| Period (months) | 21 or less | 22 to 27 | 28 to 33 | 34 to 39 | 40 to 45 | 46 to 51 | 52 to 57 | 58 to 63 | 64 to 69 | 70 to 75 | 76 or more |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Factor | 0.40 | 0.65 | 0.90 | 1.15 | 1.40 | 1.65 | 1.90 | 2.15 | 2.40 | 2.65 | 2.90 |
The rule's example (f)(3): deliveries in months 34, 36, 38 and 40 average 37 months, factor 1.15. The table is in whole months; the page rounds an average that is not a whole month to the nearest month, which the rule does not address. The interest rate is the one established by the Secretary of the Treasury and no other (215.404-71-3(b)(7)). The Bureau of the Fiscal Service publishes it for each half year on its Prompt Payment interest rates page and in the Federal Register; the 4.75 percent that opens on the page is the rate for July to December 2026 as that page showed it on 17 November 2026.
Facilities capital employed: Blocks 26 to 28
The amounts employed come from DD Form 1861, Contract Facilities Capital Cost of Money (edition of August 2004). Its Item 6, Distribution of Facilities Capital Cost of Money, lists each pool with its allocation base and its facilities capital cost of money factor and amount (base × factor); Item 6d is the total, Item 6e the Treasury rate and Item 6f the "Facilities capital employed (total divided by Treasury rate)". Item 7, Distribution of Facilities Capital Employed, gives land, buildings and equipment each a percentage and an amount, the percentages totaling 100. In the words of the rule, since the factors reflect the cost of money rate of Form CASB-CMF, "divide the contract cost of money by that same rate to determine the contract facilities capital employed" (215.404-71-4(c)(2)(v)). Item 6d goes to Item 32 of DD Form 1547 and the three amounts of Item 7b to Items 26 to 28 (215.404-71-4(e)(2)). The page starts at Item 6d: it takes the total as an entry, divides by the rate of Item 6e and applies the percentages of Item 7, which is the form's result; or it takes the three amounts of Item 7b directly.
Femp = cost of money / cost of money rate; P28 = assigned value × equipment
Values (215.404-71-4(f)): land and buildings, normal value 0 with no designated range; equipment, normal 17.5 percent, range 10 to 25 percent. The facilities capital cost of money itself is a cost that carries no profit (215.404-71-4(d)(1)(ii)) and enters the price in Block 32.
Cost efficiency factor: Block 29
A special factor without a normal value: when the contractor can demonstrate cost reduction efforts that benefit the pending contract, the objective may be increased by an amount "not to exceed 4 percent of total objective cost (Block 20 of the DD Form 1547)" (215.404-71-5(a)). P29 = factor × B20.
Total and negotiation summary: Blocks 30 to 35
Block 30 is "the total of Blocks 23, 24, 25, 27, 28, and 29" (PGI 253.215-70(c)(15)); on the form, land and buildings (Items 26 and 27) have an amount employed but no assigned value and no profit cell, so Item 27 adds nothing. The form's last part, headed Negotiated Summary, gives total costs (31), facility capital cost of money (32, from DD Form 1861), profit (33), "Total price (Line 31 + 32 + 33)" (34) and "Markup rate (Line 32 + 33 divided by 31)" (35), in three columns that carry no headings; the page fills one of them with the objective. The page also prints the profit as a percentage of Block 20.
Statutory fee limits. For a cost-plus-fixed-fee contract FAR 15.404-4(c)(4)(i) limits the fee to 15 percent of the contract's estimated cost, excluding fee, for experimental, developmental or research work and to 10 percent for other cost-plus-fixed-fee contracts. The page compares the objective with the chosen limit, taking the estimated cost as Block 31 plus Block 32. The third limit of that paragraph, 6 percent of the estimated cost of construction for architect-engineer services, has a different base and is not computed.
What it assumes
The weighted guidelines method of 215.404-71 applies: not the modified method for nonprofit organizations (215.404-72), not an alternate structured approach (215.404-73), not a cost-plus-award-fee contract (215.404-74) and not a federally funded research and development center (215.404-75). One contract type and one set of values cover the whole action. The cost objective is the Government's, already analyzed; the cost elements are entered without facilities capital cost of money. Money is shown to the cent unless whole-dollar rounding is chosen in Advanced mode (PGI 253.215-70(b)(2)). The working capital adjustment is limited automatically; every other value is used as entered and only flagged when it lies outside its range. Of DD Form 1861 the page covers Items 6d to 7; the pool lines of Item 6 (allocation base times factor for each overhead pool and year) are not entered, so their total is taken as given, and the rate of Item 6e is the one behind the cost of money factors, which need not be the current Treasury rate used for the working capital adjustment.
When it misleads
The arithmetic is the small part of the method. The result is only as good as the assigned values, and the rule ties each of them to evaluation criteria that the page cannot assess; a value other than the normal value has to be explained in the price negotiation documentation. The objective is a starting position for negotiation and not a price, a forecast of realized profit or an entitlement: 215.404-4(c)(5) rules out an attempt to agree on the individual weights and values. It misleads when the text has changed since the date above (check the current DFARS and the current Treasury rate), when the working capital period includes option periods or stretches of minimal effort, when facilities capital of formal investment plans or of divisions supplying intracompany transfers should be added (215.404-71-4(e)(2)), when the action is a definitization with costs already incurred and one value is applied to the whole base, and when the statutory fee comparison is read for contract types other than cost-plus-fixed-fee. The comparison of the fee limit uses the estimated cost including facilities capital cost of money, which is this page's reading of "estimated cost, excluding fee"; neither the FAR text nor DD Form 1547 settles it. No published worked example of a complete DD Form 1547 was available to the builder; the page reproduces the three small examples printed in the rule.