Tools › Aerodynamics › Trajectories and Spaceflight › Ball Flight with Drag and Spin › Example

A table-tennis topspin drive on the smooth-sphere drag curve

ToolBall Flight with Drag and Spin
SourceOriginal case. Drag coefficient: Morrison, F. A. (2016). Data Correlation for Drag Coefficient for Sphere. Department of Chemical Engineering, Michigan Technological University, Houghton, MI. The ball's 2.7 g and 40 mm and its spin-lift coefficient are illustrative values typed from memory.
LevelUndergraduate

Problem

A smooth 2.7 g ball 40 mm across is struck 0.65 ft above the table at 33.5 mph, 8° above the horizontal, with 5,400 rpm of topspin, at sea level. Where does it come down, and where would it come down without the spin?

Inputs to Enter

  • Object: my own smooth sphere (mass 0.00595 lbm, diameter 1.575 in, spin-lift coefficient 0.25); drag from the sphere curve
  • Launch speed 33.5 mph, launch angle 8°, launch height 0.65 ft, spin 5,400 rpm topspin
  • Sea level, no wind
Open the Ball Flight with Drag and Spin tool

Answers

  • Reynolds number at launch Re = ρ V d / μ = 41,015, giving C_D = 0.402 on the curve; drag 0.0156 lb, 2.6 times the ball's weight
  • Spin ratio S = 0.755; C_L = (16/3) × 0.25 × 0.755 = 1.01, held at the tool's limit of 0.4; spin force 0.0155 lb downward, 2.6 times the weight
  • Carry 8.39 ft; without spin 17.0 ft; with no air 24.6 ft
  • Time in the air 0.20 s, landing speed 25.3 mph; terminal velocity of the ball 20.9 mph

Notes

Open this case in the tool: /analysis-tools/aerodynamics/trajectories/ball-flight/?try=ping-pong-topspin. Topspin more than triples the downward force, which is what brings a hard drive down onto a table 9 ft long. The result depends on the lift coefficient limit of 0.4, a judgment of the tool: raise it in Advanced mode to see how much.

More Examples for This Tool