Tools › Structures › Loads and Dynamics › Pyroshock Attenuation › Example
Explosive bolt 100 in from an instrument on a complex airframe: attenuated shock spectrum peak and velocity line (Martin Marietta design guidelines manual)
| Tool | Pyroshock Attenuation |
| Source | Kacena, W. J., McGrath, M. B., and Rader, W. P. (1970). Aerospace Systems Pyrotechnic Shock Data (Ground Test and Flight), Volume VI: Pyrotechnic Shock Design Guidelines Manual. NASA CR-116406, Martin Marietta Corporation, Denver, CO. Section 3.1.3 example, p. 21, with Figures 3.5, 3.8 and 3.9; National Aeronautics and Space Administration (2011). Pyroshock Test Criteria. NASA-STD-7003A. Figure 3, Table 1 and section 4.8.1. |
| Level | Professional |
Problem
An explosive bolt gives a shock spectrum near the source that peaks at 15,000 g at 15,000 Hz, with a constant velocity line of 7 ft/s below the peak. An instrument is mounted 100 in from the bolt, measured along the shock path, on structure described as complex airframe. Estimate the shock response spectrum at the instrument, then the qualification level and test tolerance band of NASA-STD-7003A.
Inputs to Enter
- Source SRS breakpoints (Hz, g): 30, 41; 8,000, 10,940 (the 7 ft/s line, 1.367 g per Hz); 15,000, 15,000; 20,000, 15,000; Q = 10
- Reference distance 0 in, component distance 100 in; distance attenuation by structure type, curve 7 complex airframe; spectrum ramp by the constant velocity line curve (CR-116406 Figure 3.8)
- No joints; energy ratio 1; the prediction taken as the MEFE; qualification margin 3 dB, acceptance margin 0 dB
Answers
- Spectrum peak remaining: book 1.8 % ("or to 280 g"); tool 1.817 % from the digitized NASA-STD-7003A Figure 3, 15,000 g × 0.01817 = 272.5 g (−34.82 dB)
- Velocity line remaining: book 17.5 %, 1.2 ft/s; tool 17.33 %, 7 × 0.1733 = 1.21 ft/s (7.105 g at 30 Hz)
- Predicted spectrum: the 1.21 ft/s line up to a new knee at 1,150 Hz, then 272.5 g (the region under both lines in the book's Figure 3.9)
- Tool only: qualification and protoflight 384.9 g (MEFE + 3 dB), flight acceptance 272.5 g; tolerance band on the qualification plateau 192.9 g to 768.0 g up to 3 kHz and to 1,085 g above; source near-field (knee above 10 kHz), component far-field (knee below 3 kHz)
Notes
The tool's default inputs are this case; press Submit. The book reads its own charts (1.8 % of 15,000 g is 270 g; it prints 280 g); the tool reads the same curves digitized from NASA-STD-7003A Figure 3 (a vector drawing) and from an image of the book's Figure 3.8 (about 1.5 % of the value). The breakpoints at 8,000 and 15,000 Hz approximate the rounded top of the source spectrum drawn in Figure 3.9. Checked in test_pyroshock_attenuation.php, which also reproduces the example of NASA-HDBK-7005 section 5.3.4.2 (10,000 g at 1 kHz, twice the explosive weight, 0.3 m to 0.8 m: printed about 14,000 g and about 4,100 g, tool 14,142 g and 4,155 g with the equation method).