Tools › Structures › Beams › Beam on Elastic Foundation › Method
Beam on Elastic Foundation: Method
Open the Beam on Elastic Foundation tool
Beam on Elastic Foundation: Winkler Foundation, Hetényi's Closed Forms and the Exact Finite Beam
The model
A beam rests on a support that pushes back in proportion to the local deflection and to nothing else: a row of independent springs (Winkler's foundation). With k the foundation modulus per unit length of beam (force per unit length per unit deflection), E I the bending rigidity, y the deflection and w the distributed load, the beam obeys
E I y'''' + k y = w.
Every solution is a combination of e±βx cos βx and e±βx sin βx with the characteristic
β = (k / (4 E I))1/4.
1 / β is a length. A load is felt over about π / β to each side, and what happens farther away hardly matters. That is why a long beam can be treated as infinite, and why the same few functions, written here as Hetényi wrote them, describe so many cases:
A = e−βx(cos βx + sin βx), B = e−βx sin βx, C = e−βx(cos βx − sin βx), D = e−βx cos βx,
with dA/dx = −2 β B, dB/dx = β C, dC/dx = −2 β D and dD/dx = −β A.
Sign convention
One convention is used for every case, shown in the sketch: x runs to the right; forces, distributed load and the deflection y are positive downward, into the foundation; an applied couple is positive clockwise; the slope is θ = dy/dx; the bending moment M = −E I y'' is positive when it puts the bottom fiber in tension (sagging); and the shear is V = dM/dx. A positive foundation reaction k y pushes up on the beam. Other texts take the deflection upward or the hogging moment positive; the magnitudes are the same.
Infinite beam
Concentrated force P at x = 0. For x ≥ 0: y = (P β / (2 k)) A, θ = −(P β² / k) B, M = (P / (4 β)) C, V = −(P / 2) D. Under the load the deflection is P β / (2 k) and the moment P / (4 β). The beam rises slightly above its unloaded line beyond β x = 3π/4, with the largest rise e−π (4.3 %) of the central deflection at β x = π, and the largest hogging moment is e−π/2 (21 %) of the central moment at β x = π/2. The deflection line is the one the Federal Railroad Administration uses for a rail on its track modulus.
Concentrated moment M0 at x = 0. For x ≥ 0: y = (M0 β² / k) B, θ = (M0 β³ / k) C, M = (M0 / 2) D, V = −(M0 β / 2) A. The moment diagram jumps by M0 at the couple, half on each side.
Uniform load w over a length. Integrating the force solution along the loaded length gives, at a point under the load at distances a' and b' from its ends, y = (w / (2 k))(2 − D(βa') − D(βb')), θ = (w β / (2 k))(A(βa') − A(βb')), M = (w / (4 β²))(B(βa') + B(βb')) and V = (w / (4 β))(C(βa') − C(βb')). Outside the load the same integrals apply with the appropriate signs. A very long loaded length simply sinks by w / k without bending.
Semi-infinite beam
Free end with a force P and a moment M0 at the end. y = (2 P β / k) D − (2 M0 β² / k) C, θ = −(2 P β² / k) A + (4 M0 β³ / k) D, M = −(P / β) B + M0 A, V = −P C − 2 M0 β B. A force at the end of a beam deflects it four times as much as the same force far from an end, and the largest moment, 0.322 P / β at β x = π/4, is 1.29 times the moment P / (4 β) under an interior load.
Hinged end with a moment M0. y = (2 M0 β² / k) B, θ = (2 M0 β³ / k) C, M = M0 D, V = −M0 β A. The hinge holds the end down (or up) with the force M0 β. A force applied at the hinge goes straight into the support and does not bend the beam.
Finite beam with free ends
The tool solves the finite beam exactly, with no approximation by class, using the method of initial parameters and the Krylov functions
K1 = cosh βx cos βx, K2 = (cosh βx sin βx + sinh βx cos βx) / 2, K3 = (sinh βx sin βx) / 2, K4 = (cosh βx sin βx − sinh βx cos βx) / 4,
each of which is the derivative of the next divided by β, with dK1/dx = −4 β K4. At x = 0 only K1 is 1 and the rest are 0, so the deflection of a beam whose left end is free is
y = y0 K1(βx) + (θ0 / β) K2(βx) + load terms,
where, to the right of its point of application a, a force P adds P K4(β(x − a)) / (E I β³), a clockwise couple M adds −M K3(β(x − a)) / (E I β²), and a uniform load w starting at a adds (w / k)(1 − K1(β(x − a))) (the same term is subtracted where the load ends). The two unknowns, the deflection y0 and slope θ0 of the left end, follow from zero moment and zero shear at the right end.
The hyperbolic functions grow as eβL, so this form loses digits in a very long beam. Above β L = 10 the tool evaluates the same exact solution in another way, also from Hetényi: the loads are placed on an infinite beam, and two forces and two couples just outside the ends (the end-conditioning forces) are chosen so that moment and shear vanish at both ends. The test script confirms that the two forms agree between β L = 0.5 and 16.
Hetényi's classes are reported for orientation only: short for β L below π/4 (the beam is nearly rigid and the pressure follows from statics; the tool prints that rigid-body deflection for comparison), medium between π/4 and π (each end influences the whole beam), long above π (a load farther than about π / β from both ends acts as on an infinite beam). The limits π/4 and π are quoted from memory of the book, which was not consulted.
Where the foundation modulus comes from
k is the reaction per unit length of beam per unit deflection (lb/in per in, the same unit as psi; N/m per m). Three entries are offered. Entered directly: for a beam on closely spaced equal springs or clips it is the spring rate divided by the spacing, which is a good model when the spacing is below about π / (4 β) (a rule of thumb quoted from memory). As a pressure modulus times the contact width, k = k0 b: k0 is a modulus of subgrade reaction, or E / h for an elastic pad or core of thickness h under the beam. From the hoop restraint of a cylindrical shell, described next.
Aerospace uses and the shell analogy
A longeron, stringer or floor beam on a continuous elastic support is the direct use. In a stiffened cylinder, the skin's hoop stiffness supports each stringer radially like a foundation with K = b t E / R² per unit length, b being the stringer spacing (NASA Tech Brief 70-10394).
A lengthwise strip of an axisymmetrically loaded thin cylindrical shell is itself a beam on an elastic foundation. When the wall moves radially by y the hoop strain is y / R and the hoop force per unit length pushes back on a strip of width b with k = E t b / R²; the strip bends with the plate rigidity E I = E b t³ / (12 (1 − ν²)) because its sides cannot contract freely. Then
β⁴ = 3 (1 − ν²) / (R² t²),
the constant of the NASA Astronautic Structures Manual (section B7.3.3.4), and the semi-infinite solutions above are that manual's unit edge-loading solutions for a long cylinder: an edge shear and an edge moment per unit circumference, multiplied by the strip width, are the force and couple of the semi-infinite case. The disturbance decays as e−βx with 1 / β = 0.78 √(R t) for ν = 0.3, so it is spent at about π / β = 2.4 √(R t); the manual calls it negligible beyond √(R t), where the envelope is still 28 % of its edge value. With the shell option the tool reports the lengthwise bending stress 6 M / (b t²), the hoop membrane stress E y / R that accompanies the deflection and the hoop bending stress ν times the lengthwise one. The membrane stresses of the pressure or other loading must be added by the analyst.
Stresses and margins
The bending stress is the elastic M c / I at the largest moment. The Load Level radio says whether the entered loads are ultimate or limit. The ultimate margin compares Ftu with the stress at ultimate load (entered × FS when limit loads are entered); the yield margin compares Fty with the stress at limit load × FSyld. Because the system is linear the stresses scale with the load. The bearing margin compares an entered ultimate bearing strength of the foundation with the largest pressure k y / b at ultimate load.
What it assumes
A straight prismatic beam with small deflections and plane sections (no shear deformation); a foundation that reacts only to the deflection directly above it, linearly, in both directions (it pulls as well as pushes); a constant modulus along the beam; no axial load; loads applied in the plane of bending.
When it misleads
Lift-off. Where the computed deflection is upward a real support that cannot pull lets the beam lift, and deflections and moments exceed these values. The tool flags any upward deflection; a small rise far from the loads on an infinite beam matters little when the beam's own weight keeps it seated, a lifted end of a short eccentric beam matters a great deal.
The Winkler idealization. Soil and other continua spread load sideways, so neighboring points are not independent and no single k describes them; a modulus of subgrade reaction depends on the size of the loaded area. Deflections are sensitive to k (proportional to k−3/4 under a concentrated force) while moments are not (k−1/4): bracket k and trust the moments more than the deflections.
Discrete supports. Springs spaced farther apart than about π / (4 β) act as individual supports, and the moment between them is underestimated by a continuous foundation.
Deep or short beams and thick shells. Shear deformation is ignored, which matters when the depth is not small compared with 1 / β. The shell analogy holds for thin walls (R / t above about 10), axisymmetric loading and a shell longer than about π / β from the loaded edge; otherwise use the finite case with the shell strip.
Axial load. Compression in the beam lowers its effective stiffness and can buckle it on its foundation; that interaction is not included.
Stress checks not made. Shear stress, web crippling under concentrated loads, local buckling of the compression side and plastic bending are outside the tool.
Verification
No public document with a numerical worked example of this theory was found, so no printed digits are reproduced. The library is checked against an independent numerical solution of the differential equation (scipy solve_bvp on infinite, semi-infinite and finite beams, and a separate numpy solution on forty randomly generated finite beams), against the deflection formula printed in FRA Research Results RR04-03, against the long-cylinder edge-loading table of NASA TM X-73306, by equilibrium (the foundation reaction integrates to the applied load and its moment), by reciprocity and symmetry, and in the limits (a long finite beam tends to the infinite and semi-infinite solutions, a very short one to a rigid body). Hetényi's book and the Timoshenko and Roark texts are cited for the theory and were not consulted.