Tools › Environmental › Air Quality › AP-42 Emission Estimates › Example

Carbon monoxide from an industrial boiler burning distillate oil (the emission factor example of the AP-42 Introduction)

ToolAP-42 Emission Estimates
SourceU.S. Environmental Protection Agency (2024). "Introduction." In AP-42: Compilation of Air Emissions Factors from Stationary Sources, 5th ed., Vol. I. Office of Air Quality Planning and Standards, Research Triangle Park, NC. Examples of Emission Factor Application, p. 8; factor from Section 1.3, Fuel Oil Combustion, Table 1.3-1.
LevelUndergraduate

Problem

An industrial boiler burns 90,000 liters of distillate oil per day. Section 1.3 of AP-42 gives a carbon monoxide factor of 5 lb per 10³ gal for distillate-fired industrial boilers, which the Introduction rounds to 0.6 kg per 10³ L. Estimate the CO emissions. Entered as a year of operation (365 days, 8,760 hours) so that the tool's hourly and annual results can be read against the daily figure of the example.

Inputs to Enter

  • Unit system SI (results in kg/hr and tonnes/yr)
  • Combustion row 1: source type 'Fuel oil: distillate, industrial boiler under 100 MMBtu/hr [1.3]', quantity 32,850 (90 m³ per day × 365), unit m³ = 10³ L (liquid), hours 8,760, sulfur 0.5 weight percent (needed by the SO2 factor only), no control
  • Every other row blank (clear the quantities and activities of the default rows)
Open the AP-42 Emission Estimates tool

Answers

  • Activity 32,850 m³ = 8,678.1 × 10³ gal per year; CO factor 5 lb/10³ gal (Table 1.3-1, quality rating A) = 0.5991 kg/10³ L
  • E = A × EF × (1 − ER ÷ 100) = 8,678.1 × 5 × (1 − 0) = 43,390 lb/yr = 21.7 tons/yr = 19.7 tonnes/yr
  • Hourly 2.25 kg/hr, that is 53.9 kg per day (book 0.6 × 90 = 54 kg/day with the factor rounded to 0.6)
  • The same row also reports NOx 20, SO2 142 S = 71, PM 2 + 1.3 = 3.3, nonmethane organics 0.2 lb/10³ gal and lead, and lists PM10 and PM2.5 as having no factor in the tables used

Notes

Not the tool's default case: enter the row as listed. The 0.15 % difference from the book is the rounding of 0.5991 to 0.6 kg per 10³ L. The page case and the library value are checked in test_ap42_emission_estimates.php, which also compares every built-in factor with the text of the AP-42 section files. AP-42 factors are category averages; EPA does not recommend them as source-specific permit limits.