Tools › Structures › Frames and Trusses › Ring Frame Analysis › Example
Ring pinched by two opposite radial loads: bending moments and changes of diameter against the classical closed forms
| Tool | Ring Frame Analysis |
| Source | Niles, A. S., and Newell, J. S. (1943). Airplane Structures, 3rd ed., Vol. I. John Wiley and Sons, New York. Arts. 17:5 to 17:7 (eq. 17:19, 17:20, 17:23, 17:24, 17:26); the classical results are those of the thin circular ring under two diametrically opposite loads. |
| Level | Graduate |
Problem
A thin circular ring of centroidal radius 40 in and EI = 1.0 × 10⁶ lb-in² is squeezed by two inward radial loads of 100 lb at 90° and 270°. The loads balance each other, so there is no skin shear flow. Find the bending moment under a load and at 90° from the loads, the normal force there, and the changes of the two diameters.
Inputs to Enter
- Skin Inner Radius 41.5 in; Frame Attachment: shear-tied; Centroid to Outer Frame 1.5 in (ring radius R = 41.5 − 1.5 = 40 in); E I = 1.0 × 10⁶ lb-in² (for example Frame Modulus 10 Msi, Frame Inertia 0.1 in⁴)
- Two loads located by angle: 90° and 270°, radial −100 lb each
- Method: Wise coefficients; reinforcement checks off
Answers
- Moment under each load: −P R / π = −1,273.2 lb-in (the ring flattens there)
- Moment at 0° and 180°: +P R (1/2 − 1/π) = +726.8 lb-in; normal force there −P/2 = −50 lb
- Loaded diameter shortens (π/4 − 2/π) P R³ / EI = 0.9522 in; the other diameter lengthens (2/π − 1/2) P R³ / EI = 0.8744 in
Notes
Values from test_ring_frame_analysis.php, which checks the tool's coefficients and its integrated deflections against these closed forms to 2 parts in 10,000.
More Examples for This Tool
- Fuselage ring frame under four floor and seat loads: moment, normal force and shear by the Wise coefficients (Niles and Newell Example 17:8)
- Crown frame under an added antenna side load: added moment, shear and normal force, and doublers sized to carry all of it
- Fuselage frame with a floor beam and two struts under seat-track loads: ring, floor-beam and strut loads by the finite element model
- Doubler over part of a ring frame: how the added stiffness draws bending moment to the reinforced arc (finite-segment summation)
- Elliptic ring 25 × 14.7 in under four balanced 2,000 lb loads: thrust, shear and moment against Burke's working charts (NACA TN 444)
- Elliptical fuselage frame 96 × 76 in under floor loads reacted by skin shear flow: internal loads by summation and doublers for the added load
- Floating frame standing 1 in off the skin: ring radius, shear flow at the skin line, shear clips and doublers under floor loads