Tools › Structures › Frames and Trusses › Ring Frame Analysis › Example

Fuselage ring frame under four floor and seat loads: moment, normal force and shear by the Wise coefficients (Niles and Newell Example 17:8)

ToolRing Frame Analysis
SourceNiles, A. S., and Newell, J. S. (1943). Airplane Structures, 3rd ed., Vol. I. John Wiley and Sons, New York. Art. 17:8, Illustrative Example, Tables 17:1 to 17:4 (pp. 276–278).
LevelProfessional

Problem

A transverse ring of a large cabin airplane has a centroidal radius of 40 in and carries downward floor and seat loads of 1,020, 1,440, 935 and 675 lb at x = −28.5, −0.5, 21.5 and 29.25 in on its lower half. The loads are reacted by the shear flow in the fuselage skin. Find the bending moment, normal force and shear at the section on the right-hand horizontal axis, and around the ring.

Inputs to Enter

  • Skin Inner Radius 42 in; Frame Attachment: shear-tied (outer cap on the skin); Frame Area 0.60 in², Frame Inertia 2.0 in⁴, Centroid to Outer Frame 2 in, Frame Modulus 10.5 Msi, Skin Thickness 0.040 in (ring radius R = R_s − y_f = 42 − 2 = 40 in; the section values are the tool's, the book gives only the radius)
  • Frame Depth 4.5 in, Outer Cap Thickness 0.050 in, Inner Cap Thickness 0.050 in (used only by the reinforcement results below the internal loads)
  • Loads B, C, D, E located by x on the lower half: x = −28.5, −0.5, 21.5, 29.25 in; V = −1,020, −1,440, −935, −675 lb
  • Method: Wise coefficients; shear flow on the centroidal axis; angles counter-clockwise from the right
Open the Ring Frame Analysis tool (loaded with this example)

Answers

  • Angles of the loads: 3.9193, 4.6999, 5.2799, 5.5325 rad (book Table 17:1: 3.9193, 4.6999, 5.2799, 5.5326)
  • Station B: W1 = 0.0156, W2 = −0.0832, W3 = 0.1440, W4 = 0.0445 (book 0.0156, −0.0833, 0.1440, 0.0445)
  • At the section at 0°: M = −11,567 lb-in, N = +1,095.5 lb, S = +101.0 lb (book −11,560 in-lb, +1,094 lb, +103 lb)
  • Largest moment around the ring 15,463 lb-in under load C at 269.28°; largest shear 1,015.8 lb just past load E
  • Vertical diameter lengthens 0.555 in and the horizontal diameter shortens 0.555 in for the tool's frame section

Notes

The tool's default inputs are this ring; press Submit. The book's Table 17:4 row C prints N = +0.1 and S = +0.2 where its own coefficients give +1.5 and −1.6, which accounts for the differences in N and S. The reinforcement results printed below the internal loads use the tool's default doublers and are not part of the book's example.

More Examples for This Tool