Tools › Materials › Miscellaneous › MP159-Solution treated, cold drawn, and aged Bar

MP159-Solution treated, cold drawn, and aged Bar: MIL-HDBK-5J Design Allowables

Material classMiscellaneous
Alloy / temper / formMP159 / Solution treated, cold drawn, and aged / Bar
SpecificationsAMS 5842
HandbookMIL-HDBK-5J, 31 January 2003, section 7.4.2.0, Table 7.4.2.0(c) (pdf page 29 of the chapter file)
Dimension bands2
Density8359 kg/m³

Design Mechanical and Physical Properties (room temperature)

Converted from the handbook table (ksi, Msi, lb/in³) and rounded to 4 significant figures; dimension bands in inches with mm in parentheses. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.

Dimension banddia 0.000–0.500 in (0–12.7 mm)dia 0.501–1.750 in (12.73–44.45 mm)
SpecificationAMS 5842AMS 5842
BasisSS
Ftu, MPaL17931793
Fty, MPaL17241724
Fsu, MPaL903.2…
e, %L66
E, GPa243.4243.4
G, GPa77.9177.91
ν0.370.37
ρ, kg/m³83598359

Effect of Temperature

Percent of the room-temperature value against temperature, digitized from the handbook figures (the shortest exposure of each figure, every 10 °F). Strength curves give the allowable at temperature; "after exposure" curves give the room-temperature property after a soak at that temperature.

Moduli at temperature

Other MP159 Tables

Source and Use

U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.