AISI 301and Relateda,b,c-� Hard Sheet and strip: MIL-HDBK-5J Design Allowables
show US units (ksi, Msi, lb/in³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Steel |
| Alloy / temper / form | AISI 301and Relateda,b,c / � Hard / Sheet and strip |
| Specifications | AMS 5517 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 2.7.1.0, Table 2.7.1.0(b) (pdf page 223 of the chapter file) |
| Dimension bands | 1 |
| Density | 7916 kg/m³ |
Design Mechanical and Physical Properties (room temperature)
Converted from the handbook table (ksi, Msi, lb/in³) and rounded to 4 significant figures; dimension bands in inches with mm in parentheses. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | all | ||
|---|---|---|---|
| Specification | AMS 5517 | ||
| Basis | A | B | |
| Ftu, MPa | L | 854.9 | 889.4 |
| LT | 841.2 | 875.6 | |
| Fty, MPa | L | 475.7 | 572.3 |
| LT | 461.9 | 565.4 | |
| Fcy, MPa | L | 303.4 | 372.3 |
| LT | 489.5 | 606.7 | |
| Fsu, MPa | L | 455.1 | 475.7 |
| LT | 455.1 | 475.7 | |
| Fbru (e/D = 2.0), MPa | L | 1806 | 1882 |
| LT | 1806 | 1882 | |
| Fbry (e/D = 2.0), MPa | L | 848.1 | 1027 |
| LT | 848.1 | 1027 | |
| e, % | L | … | … |
| LT | 25 | 25 | |
| E, GPa | 186.2 | 186.2 | |
| G, GPa | 73.08 | 73.08 | |
| ν | 0.27 | 0.27 | |
| ρ, kg/m³ | 7916 | 7916 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other AISI 301and Relateda,b,c Tables
- AISI 301and Relateda,b,c-� Hard Sheet and strip (Table 2.7.1.0(b))
- AISI 301and Relateda,b,c-� Hard Sheet and strip (Table 2.7.1.0(b))
- AISI 301and Relateda,b,c-Annealed Sheet and strip (Table 2.7.1.0(b))
- AISI 301and Relateda,b,c-Full Hard Sheet and strip (Table 2.7.1.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.