ZK60A-T5 Extruded rod, bar, and solid shapes: MIL-HDBK-5J Design Allowables
show US units (ksi, Msi, lb/in³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Magnesium Alloy |
| Alloy / temper / form | ZK60A / T5 / Extruded rod, bar, and solid shapes |
| Specifications | AMS 4352 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 4.2.3.0, Table 4.2.3.0(c) (pdf page 21 of the chapter file) |
| Dimension bands | 6 |
| Density | 1824 kg/m³ |
Design Mechanical and Physical Properties (room temperature)
Converted from the handbook table (ksi, Msi, lb/in³) and rounded to 4 significant figures; dimension bands in inches with mm in parentheses. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | area 0–2 in2 (0–1290 mm²) | area 2.000–2.999 in2 (1290–1935 mm²) | area 3.000–4.999 in2 (1935–3225 mm²) | area 5.000–9.999 in2 (3226–6451 mm²) | area 10.000–24.999 in2 (6452–16130 mm²) | area 25.000–39.999 in2 (16130–25810 mm²) | |
|---|---|---|---|---|---|---|---|
| Specification | AMS 4352 | AMS 4352 | AMS 4352 | AMS 4352 | AMS 4352 | AMS 4352 | |
| Basis | S | S | S | S | S | S | |
| Ftu, MPa | L | 310.3 | 310.3 | 310.3 | 310.3 | 310.3 | 296.5 |
| Fty, MPa | L | 248.2 | 248.2 | 248.2 | 234.4 | 234.4 | 213.7 |
| Fcy, MPa | L | 206.8 | 193.1 | 172.4 | 158.6 | 151.7 | 137.9 |
| Fsu, MPa | L | 151.7 | 151.7 | 151.7 | … | … | … |
| Fbru (e/D = 2.0), MPa | L | 489.5 | 489.5 | 489.5 | … | … | … |
| Fbry (e/D = 2.0), MPa | L | 324.1 | 324.1 | 324.1 | … | … | … |
| e, % | L | 4 | 4 | 4 | 6 | 6 | 6 |
| E, GPa | 44.82 | 44.82 | 44.82 | 44.82 | 44.82 | 44.82 | |
| Ec, GPa | 44.82 | 44.82 | 44.82 | 44.82 | 44.82 | 44.82 | |
| G, GPa | 16.55 | 16.55 | 16.55 | 16.55 | 16.55 | 16.55 | |
| ν | 0.35 | 0.35 | 0.35 | 0.35 | 0.35 | 0.35 | |
| ρ, kg/m³ | 1824 | 1824 | 1824 | 1824 | 1824 | 1824 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other ZK60A Tables
- ZK60A-F Extruded / hollow shapes (Table 4.2.3.0(b))
- ZK60A-F Extruded / tube (Table 4.2.3.0(b))
- ZK60A-F Extruded rod, bar, and solid shapes (Table 4.2.3.0(b))
- ZK60A-T5 Die / forging (Table 4.2.3.0(c))
- ZK60A-T5 Extruded / hollow / shapes (Table 4.2.3.0(c))
- ZK60A-T5 Extruded tube (Table 4.2.3.0(c))
- ZK60A-T5 Hand / forging (Table 4.2.3.0(c))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.