ZK60A-T5 Extruded / hollow / shapes: MIL-HDBK-5J Design Allowables
show US units (ksi, Msi, lb/in³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Magnesium Alloy |
| Alloy / temper / form | ZK60A / T5 / Extruded / hollow / shapes |
| Specifications | AMS 4352 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 4.2.3.0, Table 4.2.3.0(c) (pdf page 21 of the chapter file) |
| Dimension bands | 1 |
| Density | 1824 kg/m³ |
Design Mechanical and Physical Properties (room temperature)
Converted from the handbook table (ksi, Msi, lb/in³) and rounded to 4 significant figures; dimension bands in inches with mm in parentheses. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | all | |
|---|---|---|
| Specification | AMS 4352 | |
| Basis | S | |
| Ftu, MPa | L | 317.2 |
| Fty, MPa | L | 262 |
| Fcy, MPa | L | 179.3 |
| e, % | L | 4 |
| E, GPa | 44.82 | |
| Ec, GPa | 44.82 | |
| G, GPa | 16.55 | |
| ν | 0.35 | |
| ρ, kg/m³ | 1824 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other ZK60A Tables
- ZK60A-F Extruded / hollow shapes (Table 4.2.3.0(b))
- ZK60A-F Extruded / tube (Table 4.2.3.0(b))
- ZK60A-F Extruded rod, bar, and solid shapes (Table 4.2.3.0(b))
- ZK60A-T5 Die / forging (Table 4.2.3.0(c))
- ZK60A-T5 Extruded rod, bar, and solid shapes (Table 4.2.3.0(c))
- ZK60A-T5 Extruded tube (Table 4.2.3.0(c))
- ZK60A-T5 Hand / forging (Table 4.2.3.0(c))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.