AISI 1025-All Bar: MIL-HDBK-5J Design Allowables
show US units (ksi, Msi, lb/in³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Steel |
| Alloy / temper / form | AISI 1025 / All / Bar |
| Specifications | ASTM A 108 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 2.2.1.0, Table 2.2.1.0(b) (pdf page 8 of the chapter file) |
| Dimension bands | 1 |
| Density | 7861 kg/m³ |
Design Mechanical and Physical Properties (room temperature)
Converted from the handbook table (ksi, Msi, lb/in³) and rounded to 4 significant figures; dimension bands in inches with mm in parentheses. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | all | |
|---|---|---|
| Specification | ASTM A 108 | |
| Basis | S | |
| Ftu, MPa | L | 379.2 |
| LT | 379.2 | |
| ST | 379.2 | |
| Fty, MPa | L | 248.2 |
| LT | 248.2 | |
| ST | 248.2 | |
| Fcy, MPa | L | 248.2 |
| LT | 248.2 | |
| ST | 248.2 | |
| Fsu, MPa | L | 241.3 |
| LT | 241.3 | |
| ST | 241.3 | |
| Fbru (e/D = 2.0), MPa | L | 620.5 |
| LT | 620.5 | |
| ST | 620.5 | |
| E, GPa | 199.9 | |
| Ec, GPa | 199.9 | |
| G, GPa | 75.84 | |
| ν | 0.32 | |
| ρ, kg/m³ | 7861 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other AISI 1025 Tables
- AISI 1025-Annealed Sheet, strip, and plate (Table 2.2.1.0(b))
- AISI 1025-Normalized Tubing (Table 2.2.1.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.