ZE41A-T5 Sand casting: MIL-HDBK-5J Design Allowables
show US units (ksi, Msi, lb/in³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Magnesium Alloy |
| Alloy / temper / form | ZE41A / T5 / Sand casting |
| Specifications | AMS 4439 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 4.3.6.0, Table 4.3.6.0(b) (pdf page 49 of the chapter file) |
| Dimension bands | 1 |
| Density | 1816 kg/m³ |
Design Mechanical and Physical Properties (room temperature)
Converted from the handbook table (ksi, Msi, lb/in³) and rounded to 4 significant figures; dimension bands in inches with mm in parentheses. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | all | |
|---|---|---|
| Specification | AMS 4439 | |
| Basis | S | |
| Ftu, MPa | 179.3 | |
| Fty, MPa | 120.7 | |
| Fcy, MPa | 103.4 | |
| Fsu, MPa | 117.2 | |
| Fbru (e/D = 1.5), MPa | 262 | |
| Fbru (e/D = 2.0), MPa | 337.8 | |
| Fbry (e/D = 1.5), MPa | 213.7 | |
| Fbry (e/D = 2.0), MPa | 241.3 | |
| e, % | 2 | |
| E, GPa | 44.82 | |
| Ec, GPa | 44.82 | |
| G, GPa | 16.55 | |
| ν | 0.35 | |
| ρ, kg/m³ | 1816 | |
Effect of Temperature
Percent of the room-temperature value against temperature, digitized from the handbook figures (the shortest exposure of each figure, every 10 °F). Strength curves give the allowable at temperature; "after exposure" curves give the room-temperature property after a soak at that temperature.
Strength allowables at temperature, percent of room temperature
Moduli at temperature
| °C | F_tu | F_ty |
|---|---|---|
| 38 | 97.7 | 90.1 |
| 93 | 85.9 | 88.6 |
| 149 | 72.6 | 80.9 |
Factors in percent of the room-temperature allowable.
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.