7475-T7651 Plate: MIL-HDBK-5J Design Allowables
show US units (ksi, Msi, lb/in³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Aluminum |
| Alloy / temper / form | 7475 / T7651 / Plate |
| Specifications | AMS 4089 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 3.7.10.0, Table 3.7.10.0(b) (pdf page 460 of the chapter file) |
| Dimension bands | 3 |
| Density | 2796 kg/m³ |
Design Mechanical and Physical Properties (room temperature)
Converted from the handbook table (ksi, Msi, lb/in³) and rounded to 4 significant figures; dimension bands in inches with mm in parentheses. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | 0.250–0.499 in (6.35–12.67 mm) | 0.500–1.000 in (12.7–25.4 mm) | 1.001–1.500 in (25.43–38.1 mm) | |
|---|---|---|---|---|
| Specification | AMS 4089 | AMS 4089 | AMS 4089 | |
| Basis | S | S | S | |
| Ftu, MPa | L | 482.6 | 475.7 | 475.7 |
| LT | 489.5 | 482.6 | 482.6 | |
| Fty, MPa | L | 413.7 | 406.8 | 406.8 |
| LT | 413.7 | 406.8 | 406.8 | |
| Fcy, MPa | L | 413.7 | 406.8 | 406.8 |
| LT | 434.4 | 427.5 | 406.8 | |
| Fsu, MPa | L | 282.7 | 268.9 | 255.1 |
| LT | 282.7 | 268.9 | 255.1 | |
| Fbru (e/D = 1.5), MPa | L | 717.1 | 710.2 | 710.2 |
| LT | 717.1 | 710.2 | 710.2 | |
| Fbru (e/D = 2.0), MPa | L | 937.7 | 923.9 | 923.9 |
| LT | 937.7 | 923.9 | 923.9 | |
| Fbry (e/D = 1.5), MPa | L | 565.4 | 558.5 | 558.5 |
| LT | 565.4 | 558.5 | 558.5 | |
| Fbry (e/D = 2.0), MPa | L | 668.8 | 655 | 655 |
| LT | 668.8 | 655 | 655 | |
| e, % | L | 9 | 8 | 6 |
| LT | 9 | 8 | 6 | |
| E, GPa | 70.33 | 70.33 | 70.33 | |
| Ec, GPa | 73.08 | 73.08 | 73.08 | |
| G, GPa | 26.89 | 26.89 | 26.89 | |
| ν | 0.33 | 0.33 | 0.33 | |
| ρ, kg/m³ | 2796 | 2796 | 2796 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other 7475 Tables
- 7475-T61 Clad sheet (Table 3.7.10.0(d))
- 7475-T61 Sheet (Table 3.7.10.0(b))
- 7475-T651 Plate (Table 3.7.10.0(b))
- 7475-T7351 Plate (Table 3.7.10.0(c))
- 7475-T761 Clad sheet (Table 3.7.10.0(d))
- 7475-T761 Sheet (Table 3.7.10.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.