7050-T74 Die forging: MIL-HDBK-5J Design Allowables

show US units (ksi, Msi, lb/in³) open the MIL-HDBK-5J tool compare against temperature find alternatives

Design Mechanical and Physical Properties (room temperature)

Converted from the handbook table (ksi, Msi, lb/in³) and rounded to 4 significant figures; dimension bands in inches with mm in parentheses. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.

Effect of Temperature

The handbook maps no temperature-effect figure to this table.

Other 7050 Tables

• 7050-T73511 Extrusion (Table 3.7.4.0(e))
• 7050-T7451 Plate (Table 3.7.4.0(b))
• 7050-T74511 Extrusion (Table 3.7.4.0(e))
• 7050-T7452 Die forgings (Table 3.7.4.0(c))
• 7050-T7452 Hand Forging (Table 3.7.4.0(d))
• 7050-T7651 Plate (Table 3.7.4.0(b))
• 7050-T76511 Extrusion (Table 3.7.4.0(e))

Source and Use

U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.