Tools › Materials › Aluminum › 5454-H32 Sheet and plate

5454-H32 Sheet and plate: MIL-HDBK-5J Design Allowables

show US units (ksi, Msi, lb/in³) open the MIL-HDBK-5J tool compare against temperature find alternatives

Material class	Aluminum
Alloy / temper / form	5454 / H32 / Sheet and plate
Specifications	AMS-QQ-A-250/10
Handbook	MIL-HDBK-5J, 31 January 2003, section 3.5.4.0, Table 3.5.4.0(b) (pdf page 248 of the chapter file)
Dimension bands	1
Density	2685 kg/m³

Design Mechanical and Physical Properties (room temperature)

Converted from the handbook table (ksi, Msi, lb/in³) and rounded to 4 significant figures; dimension bands in inches with mm in parentheses. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.

Dimension band		0.020–2.000 in (0.508–50.8 mm)
Specification		AMS-QQ-A-250/10
Basis		A	B
F_tu, MPa	L	248.2	255.1
F_tu, MPa	LT	248.2	255.1
F_ty, MPa	L	179.3	186.2
F_ty, MPa	LT	165.5	172.4
F_cy, MPa	L	165.5	172.4
F_cy, MPa	LT	179.3	186.2
F_su, MPa	L	144.8	151.7
F_su, MPa	LT	144.8	151.7
F_bru (e/D = 1.5), MPa	L	358.5	372.3
F_bru (e/D = 1.5), MPa	LT	358.5	372.3
F_bru (e/D = 2.0), MPa	L	496.4	510.2
F_bru (e/D = 2.0), MPa	LT	496.4	510.2
F_bry (e/D = 1.5), MPa	L	248.2	262
F_bry (e/D = 1.5), MPa	LT	248.2	262
F_bry (e/D = 2.0), MPa	L	303.4	317.2
F_bry (e/D = 2.0), MPa	LT	303.4	317.2
e, %	L	8	8
e, %	LT	…	…
E, GPa		70.33	70.33
E_c, GPa		71.71	71.71
G, GPa		26.54	26.54
ν		0.33	0.33
ρ, kg/m³		2685	2685

Effect of Temperature

The handbook maps no temperature-effect figure to this table.

Other 5454 Tables

5454-H111 Extrusion (Table 3.5.4.0(b))
5454-H112 Extrusion (Table 3.5.4.0(b))
5454-H112 Sheet and plate (Table 3.5.4.0(b))
5454-H34 Sheet and plate (Table 3.5.4.0(b))
5454-O Extrusion (Table 3.5.4.0(b))
5454-O Sheet and plate (Table 3.5.4.0(b))

Source and Use

U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.