Tools › Materials › Aluminum › 2424-T3 Sheet

2424-T3 Sheet: MIL-HDBK-5J Design Allowables

Material classAluminum
Alloy / temper / form2424 / T3 / Sheet
SpecificationsAMS 4273
HandbookMIL-HDBK-5J, 31 January 2003, section 3.2.10.0, Table 3.2.10.0(b) (pdf page 200 of the chapter file)
Dimension bands1
Density2768 kg/m³

Design Mechanical and Physical Properties (room temperature)

Converted from the handbook table (ksi, Msi, lb/in³) and rounded to 4 significant figures; dimension bands in inches with mm in parentheses. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.

Dimension band0.020–0.128 in (0.508–3.251 mm)
SpecificationAMS 4273
BasisAB
Ftu, MPaL448.2455.1
LT434.4448.2
Fty, MPaL337.8351.6
LT289.6310.3
Fcy, MPaL289.6310.3
LT317.2337.8
Fsu, MPaL282.7296.5
LT282.7296.5
Fbru (e/D = 1.5), MPaL668.8689.5
LT668.8689.5
Fbru (e/D = 2.0), MPaL889.4917
LT889.4917
Fbry (e/D = 1.5), MPaL427.5455.1
LT427.5455.1
Fbry (e/D = 2.0), MPaL537.8572.3
LT537.8572.3
e, %L1010
LT1515
E, GPa67.5767.57
ν0.340.34
ρ, kg/m³27682768

Effect of Temperature

The handbook maps no temperature-effect figure to this table.

Other 2424 Tables

Source and Use

U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.